Pump controller development board 3D Model
Pump controller development board
YeaCreate Iot is committed to providing smart home solutions to create a smarter and more convenient life for people. As an innovator in embedded application technology, YeaCreate Iot is constantly driving the innovation of home interconnection and intelligent interconnection solutions.
This product is used to illustrate the design goals, functional requirements and application scope of the control mainboard for mobile charging devices.
This product adopts a split structure design: the control mainboard and the charging interface board are separated. Not only enhances the modularity of the system but also effectively reduces the impact of external environmental factors (such as moisture and splashing water) on the core control circuit.The charging interface board is mainly responsible for external power input and connection, while the control mainboard realizes core logic control, driving and protection functions.Through this design, the system ensures reliability and water resistance while also taking into account maintenance convenience and scalability.The system architecture, main functions, interface definitions and reliability requirements of the multi-functional mainboard for mobile charging devices will be elaborated in detail to provide a unified technical basis for subsequent research and development, testing, production and quality assurance.
Unless otherwise specified, the standards that the product complies with are described in this document.
Appearance and size
1 The front view of the controller board is as follows：
2 The reverse side view of the controller board is as follows：
3 Controller board size
Length：36.25mm
Width：47.82mm
Installation hole spacing：
|
The hole in the upper right corner (next to BAT)
|
The hole at the lower left corner (next to NTC)
|
The hole at the lower right corner (beside the PUMP)
|
|
Distance from the right edge：2.96 mm
|
Distance from the left edge：3.2 mm
|
Distance from the right edge：2.97 mm
|
|
Upper edge of distance：4.18 mm
|
Distance from the lower edge：7.9 mm
|
Distance from the lower edge：2.82 mm
|
4 The front view of the charging pad is as follows：
5 The reverse side picture of the charging pad is as follows：
6 Charging pad size
Length：47.8200mm
Width：19.3201mm
Installation hole spacing：
|
Left middle corner hole (beside FPC)
|
）Right middle corner hole (right side of FPC)
|
|
Distance from the left edge：2.3 mm
|
Distance from the right edge：2.3 mm
|
|
Distance from the lower edge：8.509 mm
|
Distance from the lower edge：8.509 mm
|
Application Guidance
This chapter mainly introduces the usage methods of development boards, mainly including:
- Functions of the development board
- Configuration of the development board
- Power supply for the development board
1 Functions of the development board
Table3.1 Function list
|
Number
|
Description
|
|
1
|
FPC connector interface
|
|
2
|
Battery interface
|
|
3
|
Pump control interface
|
|
4
|
LED dual-color button interface
|
|
5
|
NTC interface
|
|
6
|
Type-C charging interface
|
|
7
|
Type-A charging interface
|
|
8
|
Digital tube display
|
|
9
|
Digital tube control keys
|
|
Explanation：
STM8 flash port：VDD、SWIM、RST、GND
STM8DEBUG port/Serial port：GND、TX、RX
|
3.2Development board configuration
Table 3.2 Development board configuration
|
Project
|
Model
|
Remarks
|
|
Main control
|
IP5356＋STM8
|
Supports fast charging function and ultra-low power consumption operation
|
|
Battery
|
18650 3.7V 6000mAh
|
|
3.3 Power supply for the development board
The development board can be powered by a battery, as shown in the following figure。
Table 3.3 The development board is battery-powered
|
Project
|
Battery capacity
|
Remark
|
|
Battery-powered
|
6000mAh
|
|
Commonly used website:
Specification of Water Pump Controller Development Board.pdf
EN 
中文 